Subject: New FFB (Tested on SP Mod) 6,783 views

« Prev
1
Next »

seaking Driveway Drifter Posts: 24 Joined: July 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 8, 2014 4:40:02 GMT Post by seaking on Jun 8, 2014 4:40:02 GMT Read THIS before you comment if you don't know anything about how FFB works in rFactor, it's not for noobs. Comes with Realfeel 0938, gives you more rear feel that people say the mod doesn't have. Make sure Digital Steer Rate under Rates in options is 50% Try using 55 lock and 5 caster. Controller.ini goes into USERDATA/(InGameName) LINK [ Force Feedback ] FFB Device Type="1" // Type of FFB controller: 0=none 1=wheel, 2=stick/custom, 3=rumble pad. FFB Effects Level="4" // Number of FFB effects to use: 0=No Effects, 1=Low, 2=Medium, 3=High, 4=Full, 5=Custom. FFB Gain="1.00000" // Strength of Force Feedback effects. Range 0.0 to 1.0. FFB Ignore Controllers="0" // Do not use FFB on: 1=controller1, 2=controller2, 4=controller3 (or add values to ignore multiple controllers) FFB Throttle FX on steer axis="1" // 0 = Throttle effects on throttle axis, 1 = throttle effects on steering axis. FFB Brake FX on steer axis="1" // 0 = Brake effects on brake axis, 1 = brake effects on steering axis. FFB steer vibe freq mult="0.75172" // Controls frequency of steering vibration. Recommended: 0.5 to 1.0, 0.0 disables steering vibration. FFB steer vibe zero magnitude="0.01694" // Magnitude of steering vibration at 0mph (reference point). FFB steer vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB steer vibe zero magnitude). FFB steer vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB steer force prediction="0.00000" // Time into the future that force is predicted, to help counteract wheel latency (0.0 to disable) FFB steer force max change="100.00000" // Maximum change per second based on current difference between calculated and applied force, to help avoid jerky behavior (values under 15 or so should reduce jerkiness, 100 disables) FFB steer force neutral range="0.00000" // Max distance from center "neutral force" location where forces are reduced to help avoid oscillation (0.0 to disable) FFB steer force neutral function="0.00000" // Function to apply near neutral force location, in order to tune out FFB "deadzone" but keeping oscillations in check: 0.0=original, 1.0=new FFB steer force exponent="1.50403" // Steering force output "sensitivity". Range 0.0 to infinity. 0.0 to 1.0 = higher sensitivity, greater than 1.0 = lower sensitivity. FFB steer force input max="-11500.00000" // Recommended: 11500 (-11500 if controller pulls in the wrong direction). FFB steer force output max="1.20000" // Maximum force output of steering force, recommendation 0.8 to 2.0 FFB steer force grip function="1.00000" // Range 0.0 to 1.0 (previous hardcoded value was 1.0) - lower values will make steering force decrease LATER as front tire grip is lost - try 0.3 FFB steer force grip weight="0.65000" // Range 0.0 to 1.0, recommended: 0.4 to 0.9. How much weight is given to tire grip when calculating steering force. FFB steer force grip factor="0.40000" // Range 0.0 to 1.0, recommended: 0.2 to 0.6 (previously hardcoded to 0.4). How much of a factor the front wheel grip is on the steering weight. FFB steer front grip fract="0.00000" // Range 0.0 to 1.0 (previous hardcoded value was 0.0), additional effect of front grip loss on steering force FFB steer update threshold="0.05000" // Amount of change required to update steer force/vibe (0.0 - 1.0). Lower values = steering force updated more frequently = lower frame rate. FFB steer friction coefficient="0.00000" // Coefficient to use for steering friction. Range: -1.0 to 1.0 FFB steer friction saturation="0.00000" // Saturation value to use for steering friction. Range: 0 - 1.0 FFB steer damper coefficient="0.00000" // Coefficient to use for steering damper. Range: -1.0 to 1.0 FFB steer damper saturation="0.00000" // Saturation value Not sure what to tellto use for steering damper. Range: 0 - 1.0 FFB throttle vibe freq mult="0.25000" // Scales actual engine frequency to force FFB vibration frequency. Suggested range: 0.10 to 0.50 FFB throttle vibe zero magnitude="0.02586" // Magnitude of engine vibration at 0rpm (reference point). FFB throttle vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB throttle vibe zero magnitude). FFB throttle vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB throttle vibe update thresh="0.10000" // Amount of change required to update throttle vibe (0.0 - 1.0) FFB brake vibe freq mult="0.75172" // Scales actual brake rotational frequency to force feedback vibration frequency. FFB brake vibe zero magnitude="0.10069" // Magnitude of brake vibration at 0mph (reference point). FFB brake vibe slope="0.00000" // Slope of line defining magnitude as a function of frequency (used with FFB brake vibe zero magnitude). FFB brake vibe wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB brake vibe update thresh="0.10000" // Amount of change required to update brake vibe (0.0 to 1.0) FFB rumble strip magnitude="0.35000" // How strong the rumble strip rumble is. Range 0.0 to 1.0, 0.0 disables effect. FFB rumble strip freq mult="1.00000" // Rumble stip frequency multiplier 1.0 = one rumble per wheel rev. FFB rumble strip wave type="0" // Type of wave to use for vibe: 0=Sine, 1=Square, 2=Triangle, 3=Sawtooth up, 4=Sawtooth down. FFB rumble strip pull factor="-0.00000" // How strongly wheel pulls right/left when running over a rumble strip. Suggested range: -1.5 to 1.5. FFB rumble strip update thresh="0.10000" // Amount of change required to update rumble strip effect (0.0 - 1.0) FFB jolt magnitude="1.00000" // How strong jolts from other cars (or walls) are. Suggested Range: -2.0 to 2.0.
Click the picture, you won't. Edited by seaking [Jun 13, 2014 22:31:32 GMT] Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

czosnek Semi-Pro Drifter Posts: 100 Joined: April 2014 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 8, 2014 21:09:49 GMT via the ProBoards App Post by czosnek on Jun 8, 2014 21:09:49 GMT Did you think about ppl with dofferent controllers than yours? Tapped from Galaxy S3
Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

seaking Driveway Drifter Posts: 24 Joined: July 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 9, 2014 0:50:32 GMT Post by seaking on Jun 9, 2014 0:50:32 GMT Yes, I thought they knew how to remap controls, or how to copy text from one file to another.
Click the picture, you won't. Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

LoW-LiFE Semi-Pro Drifter I like DRiFTING with your MOM! Posts: 288 Joined: September 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 9, 2014 20:36:20 GMT Post by LoW-LiFE on Jun 9, 2014 20:36:20 GMT Sorry to say these settings really do not work proper with my instalation of rFactor. It made the cars completly undriveble ..... now ofcourse i backed up my old files and i suggest everyone who tries it to do the same ...... maybe its just me doin something wrong but better safe then sorry lol
Subscribe to my YouTube channel now Click here! Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

seaking Driveway Drifter Posts: 24 Joined: July 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 10, 2014 0:17:27 GMT Post by seaking on Jun 10, 2014 0:17:27 GMT Don't know what to tell you, everyone I know who's tried them loves them, I've tried it on other mods such as Blancpain and F1 1975, and it works flawless. Were you using SP or PD? What caster and lock are you running? Both of those have great effect on steering feel.
Click the picture, you won't. Edited by seaking [Jun 10, 2014 0:27:52 GMT] Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

seaking Driveway Drifter Posts: 24 Joined: July 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 11, 2014 0:45:00 GMT Post by seaking on Jun 11, 2014 0:45:00 GMT ***Make sure sensitivity options are at 50% on controller 1 if your wheel is controller 1, I forgot to do that since my wheel is controller 2.
Click the picture, you won't. Edited by seaking [Jun 11, 2014 0:46:36 GMT] Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

SJDFOX Grassroots Drifter Posts: 96 Joined: April 2014 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 11, 2014 0:57:37 GMT Post by SJDFOX on Jun 11, 2014 0:57:37 GMT Brah you don't event use 900 degrees? Do you even angle brah??? lol only pulling you're leg these setting are pretty decent on my DFGT, i was surprised.
Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

seaking Driveway Drifter Posts: 24 Joined: July 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 12, 2014 0:04:58 GMT Post by seaking on Jun 12, 2014 0:04:58 GMT OP updated.
Click the picture, you won't. Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

LoW-LiFE Semi-Pro Drifter I like DRiFTING with your MOM! Posts: 288 Joined: September 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 12, 2014 14:33:04 GMT Post by LoW-LiFE on Jun 12, 2014 14:33:04 GMT well the problem it gives me it doesnt center proper anymore like the force goes away from the middle so its really hard to steer ...i have this same problem with some of the mods like i say its probly something in my setup over time i just added so many thing i should do a fresh install again maybe but ima to lazy lol
Subscribe to my YouTube channel now Click here! Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

seaking Driveway Drifter Posts: 24 Joined: July 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 12, 2014 15:10:06 GMT Post by seaking on Jun 12, 2014 15:10:06 GMT Jun 12, 2014 14:33:04 GMT LoW-LiFE said: well the problem it gives me it doesnt center proper anymore like the force goes away from the middle so its really hard to steer ...i have this same problem with some of the mods like i say its probly something in my setup over time i just added so many thing i should do a fresh install again maybe but ima to lazy lol Have you tried reversing realfeel...?
Click the picture, you won't. Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

LoW-LiFE Semi-Pro Drifter I like DRiFTING with your MOM! Posts: 288 Joined: September 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 13, 2014 0:31:02 GMT Post by LoW-LiFE on Jun 13, 2014 0:31:02 GMT okj thnx buddy i will look into that cause there are a few cars i like to use in the game that now are impossible to control lol so hope it helps
Subscribe to my YouTube channel now Click here! Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

LoW-LiFE Semi-Pro Drifter I like DRiFTING with your MOM! Posts: 288 Joined: September 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jun 24, 2014 23:39:59 GMT Post by LoW-LiFE on Jun 24, 2014 23:39:59 GMT Jun 12, 2014 15:10:06 GMT seaking said: Have you tried reversing realfeel...? That my friend was the tip that made my day never realized u could do that now it works peachie plus i can now also use the mods that were reversed many thnx ... forgot to post this
Subscribe to my YouTube channel now Click here! Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

nultweezes Grassroots Drifter In-game name: " Driftkikker" Posts: 66 Joined: January 2014 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Jul 3, 2014 13:32:37 GMT Post by nultweezes on Jul 3, 2014 13:32:37 GMT Just a little tip for g25/27 users. If you put overall effects strength above 100, you have less deadzone in the middle. Just don't exaggerate or you'll lose details in your ffb. Put it at 105 or something.
www.youtube.com/user/NITROLLATOR/videos for rfactor drift vids Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

driftarmy Driveway Drifter Posts: 3 Joined: May 2014 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Aug 1, 2014 10:56:42 GMT Post by driftarmy on Aug 1, 2014 10:56:42 GMT hey theres no ingame name in my userdata
Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

seaking Driveway Drifter Posts: 24 Joined: July 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Aug 21, 2014 20:43:10 GMT Post by seaking on Aug 21, 2014 20:43:10 GMT The name of the folder is the name you chose, not literally (IngameName). DERP
Click the picture, you won't. Edited by seaking [Aug 21, 2014 20:43:32 GMT] Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

efidyno2nr Driveway Drifter Posts: 20 Joined: September 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Dec 16, 2014 2:50:24 GMT Post by efidyno2nr on Dec 16, 2014 2:50:24 GMT I have been having a very strong pulling away from center since my fresh install...is this Reversing of RealFeal something done in the coding, or on the fly? I am desperate to fix this as I have got all my vics and tracks finally working today on my new rig I built JUST for this game and now it feels like turds Thanks ahead of time
Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

efidyno2nr Driveway Drifter Posts: 20 Joined: September 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Dec 16, 2014 4:07:05 GMT Post by efidyno2nr on Dec 16, 2014 4:07:05 GMT Think I have found the answer to my own question, but not sure until I apply it in the game to reverse the FF settings. will give a try and update
Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

efidyno2nr Driveway Drifter Posts: 20 Joined: September 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Dec 16, 2014 4:32:08 GMT Post by efidyno2nr on Dec 16, 2014 4:32:08 GMT Dude...I love you ....Reversing the RF was the issue..I owe you my life oh honorable one.
Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

drifter99 Driveway Drifter Posts: 21 Joined: November 2013 Currently Offline Gender: Male	New FFB (Tested on SP Mod) Dec 16, 2014 12:16:37 GMT Post by drifter99 on Dec 16, 2014 12:16:37 GMT Jul 3, 2014 13:32:37 GMT nultweezes said: Just a little tip for g25/27 users. If you put overall effects strength above 100, you have less deadzone in the middle. Just don't exaggerate or you'll lose details in your ffb. Put it at 105 or something. thanks for the tip, will try
Reply Quote Select Post Deselect Post Link to Post Member Give Gift Back to Top

Reply